Free mm to carat calculator

Turn a gemstone’s size in millimetres into an estimated carat weight. It adjusts for the stone’s density and the cut shape, so a sapphire and an amethyst of the same size get different answers.

Typical density used: 3.52 g/cm³.

Measured from the table or top to the bottom tip. Leave it empty and the tool assumes a typical depth.

Enter the size of your stone above to see the estimated carat weight.

Round stone sizes by carat weight

Diameter in millimetres of a round stone for each carat weight, with the depth at 60 percent of the diameter. Denser stones are smaller at the same weight.

WeightDiamondSapphireEmeraldAmethyst
0.25 ct4.1 mm3.9 mm4.5 mm4.5 mm
0.50 ct5.2 mm4.9 mm5.6 mm5.7 mm
0.75 ct5.9 mm5.6 mm6.4 mm6.5 mm
1.00 ct6.5 mm6.2 mm7.1 mm7.1 mm
1.50 ct7.4 mm7.1 mm8.1 mm8.2 mm
2.00 ct8.2 mm7.8 mm8.9 mm9.0 mm
3.00 ct9.4 mm9.0 mm10.2 mm10.3 mm
4.00 ct10.3 mm9.9 mm11.2 mm11.3 mm
5.00 ct11.1 mm10.6 mm12.1 mm12.2 mm

How millimetres turn into carats

A carat is a weight, not a size: one carat is 0.2 grams. So the same millimetre size gives different carat weights for different stones. The calculator multiplies length, width and depth, then a shape factor for how much of that box the cut fills, then the stone’s specific gravity (its density), and divides by 200. A 6.5 mm round diamond with a typical 4 mm depth comes out at about 1.0 ct. The same cut in amethyst weighs about 0.78 ct.

Why the same size weighs less in some stones

Density is the reason. Sapphire and ruby are about 4.0 g/cm³, diamond about 3.5, emerald about 2.7 and quartz varieties such as amethyst and citrine about 2.65. Opal is around 2.1 and amber only about 1.1. A one carat sapphire is therefore noticeably smaller than a one carat amethyst, and an amber of the same size weighs a fraction of either. Pick the right stone in the calculator, or use the density option if yours is not listed.

How accurate is a size-based estimate?

Good enough to compare stones and check a listing, not good enough to price one. Cuts differ in how deep the pavilion is, how thick the girdle is and how rounded the sides are, and that moves the weight by roughly 10 percent either way. Measure the widest length and width with calipers to 0.1 mm, and the depth if you can reach it. A stone set in jewelry often cannot be measured fully, so treat the answer as a ballpark.

Carat and karat are different things

Carat (ct) measures gemstone weight. Karat (k) measures how much of a gold alloy is pure gold. A 1 ct diamond ring in 14k gold uses both words and means two different things. Also remember that carat weight is only one part of value: colour, clarity, cut, treatment and origin matter at least as much, so a heavier stone is not automatically worth more.

Not sure which stone you have?

The density you pick decides the answer. Upload a photo to the free crystal identifier to get the likely stone, its hardness and the look-alikes worth ruling out.

Open the crystal identifier

Where the numbers come from

The shape factors are the standard diamond cutter constants (round 0.0061, oval 0.0062, emerald cut 0.0080 and so on at a density of 3.52), rescaled so they work for any stone. Densities are typical values from gemological references. The cabochon factor is a rough dome estimate, so expect a wider margin there.

mm to carat questions